|
8110ME Technicals
|
Frequency
Range/Mhz
|
Insertion
Loss
|
Input
Return
Loss
|
Output
Return
Loss
|
Port to
Port
Isolation
|
|
|
5-15
|
3.3dB
|
25dB
|
25dB
|
25dB
|
|
16-42
|
3.4dB
|
26dB
|
35dB
|
35dB
|
|
52-400
|
3.6dB
|
25dB
|
28dB
|
28dB
|
|
401-860
|
3.7dB
|
25dB
|
25dB
|
26dB
|
|
861-1002
|
3.8dB
|
20dB
|
25dB
|
24dB
|
|
1003-1200*
|
4.0dB
|
25dB
|
22dB
|
22dB
|
|
|
* Area of Extend MoCA Bandwidth
|
|
|
|
|
|
Product Description:
The Model 8110ME, MCR Broadband 2-way equal loss horizontally ported SplitBINER®. Provides an excellent RF signal path for analog and digital cable TV and off-air signals. While providing entended bandwidth to futher enable MoCA (Multimedia over Coax Alliance) home networkng technologies to co-exisit on the same coaxial cable media with DOCSISTM compliant cable modem appications.
The device therefore can allow the distribution of MoCA data transmission technology throughout a dwelling utilizing the existing coaxial media wiring.
Product Standard Features:
Design allows co-existance of Cable TV type programming, networked DVRs & computer accessories over the MoCA network stacked on the same coaxial cable.
Standard broadband cable TV splitters have an operational bandwidth from 5-1000Mhz. MoCA home networking operational frequencies are 975-1550Mhz. The extended bandwidth SplitBINERS frequency allows MoCA data streams to transmit and receive in a protected upper frequency band.
Patent pending gold plated 340o center conductor siezing insert pins
Tin-plated, zinc die-cast housing with soldered back plate provides -110dB of RFI. All are highly precision machined with SCTE compliant threading and are spaced on 1" centers.
All ports are water sealed and have be tested to withstand 30 psi of internal pressure. All ports comply to all existing SCTE standards.
Built-in NPO capacitors on all ports. All components are temperature hardened. Devices designed to remain stable in enviroments of -40 to +85o C and maintain all technical specifications.
INPUT PORT SURGE - Pass 6kV 3kA combination wave surge test. As defined inSpecial magnetism resistant ferrite core material allows ferrites continued operation within designed specifications when high RF levels are applied.
OUTPUT PORTS SURGE - Pass 3kV 100A @ 100khz ring wave surge test. As defined in IEEE C62.41.1991 for cat A3 type device.
Specifications subject to change without notice.
|
|
|
|
|
|
|
|
