Home Networking Depot
Bonding the family home through technology





Title - Zinwell manufacturered Mulltiswitch





Link to eBay Store











Zinwell Logo for

MCR Group Title for MI-3x4 Multiswirch


Image of MI-3x4 Multiswitch
Multiswitch MI-3x4 Technicals
RF Bandwidth
47-
862Mhz
950-
2050Mhz
Impedance
75 Ohm
75 Ohm
Insertion Loss
-4.0dB
-5.0dB
Return Loss
10.0dB
9.0dB
Cross Polarization Isolation
30 dB
Output Port to Port Isolation
25 dB
Surge Protection*
6kV, 2kA
3kV, 200A
Operational Temparture
-40 to +65° C
Weight w/3 port terminators
6 oz (171 grams)
*As defined in IEEE C62.41.1991, for Cat B3 devices.

Key Features:

Three (3) input ports: Odd (RHCP) 13V; VHF/UHF 54-862Mhz and Even (LHCP) 18v.

Four (4) output ports allows operates of up to four (4) 4 receivers or two (2) recieverd and a TiVo reviever with dual inputs. All from a single 18-inch satellite dish.

Mini size 3.0" x 3.75". about the size of your palm.

Multiswitch can be utilized in both SWITCHED, 950-1450Mhz and STACKED, 950-2050Mhz applications.

Waterproof nickel-plated Zinc die-cast housing, with 360° center conductor siezing connector inserts.

Highly reliable diode steering for LNB switching.

Three (3) screw-on "F" port terminators included.

All components are temperature hardened. Device is designed to remain stable in enviroments of -40 to +65o C and maintain all technical specifications.

NESC Compliant 4.55mm ground clamp, with stainless and UV protected labels.


Product Description:

This 3 In & 4 Out passive (Non-amplified) DSS multiswitch provides for the attachment up to 4 satellite receivers from 1-18 inch satellite dish. Features two (2) LNB inputs for receiving both vertical and horizontal polarity channels at each connected receiver, plus 1 Off-Air Antenna or Cable TV input. Terrestrial or Off-Air VHF/UHF signals can be diplexed on the same coaxial cable. This unit is ideal for single-house applications.

If an outdoor antenna is combined onto the coax, a Satellite Off-Air Diplexer, EDIP-1 (Sold separately) will be required at each TV/Satellite Receiver you connect to separate the DSS satellite signals from the off-air the signals.

The Multiswitch will pass signals from stacked frequency plans for Direct TV's 101° W transponder plan. It will also except 13/17V and 14/18V switching systems. The switch is compatible with all the mini-dish systems on the market today.

Installation Drawing of MI-3x4 Multiswitch

Specifications subject to change without notice.




Bookmark and Share




1/17/2011