HRS-41G Technicals
|
Frequency
Range/Mhz
|
Insertion
Loss
|
Input
Return
Loss
|
Output
Return
Loss
|
Port to
Port
Isolation
|
|
|
5-15
|
6.8dB |
25dB |
26dB |
30dB |
|
|
16-45
|
6.8dB |
30dB |
28dB |
40dB |
|
|
54-400
|
6.8dB |
30dB |
30dB |
30dB |
|
|
401-750
|
6.9dB |
26dB |
26dB |
30dB |
|
|
750-1000
|
7.2dB |
26dB |
26dB |
28dB |
|
|
|
|
|
2nd harmonic (intermodulation) measured
-60dB w/ 2- 55dBmV CW carriers applied.
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
Specifications subject to change
without notice.
|
|
|
Product Description:
The Model HRS-41G, CEI/Premisa® 4-way equal loss horizontal ported output RF splitter & provides an excellent RF signal path for analog and digital cable TV and off-air signals. The housing unique design places all F ports on a single side.
Applications of this splitter had been made very versatile due to the unique configurutations of the F port. Installation into close and tight fitting security lockboxes or premise interface devices allows positioning of the coaxial cables without exceeding cable's bend radius'.
Product Standard Features:
Design allows co-existances of drop amplifier and cable modem on same coaxial cable.
Patent pending gold plated 360o insert pins
Tin-plated, zinc die-cast housing with soldered back plate provides -130dB of RFI. All are highly precision machined with SCTE compliant threading and are spaced on 1" centers.
All ports are water sealed and have be tested to withstand 30 psi of internal pressure. All ports comply to all existing SCTE standards.
Built-in NPO capacitors on all ports. All components are temperature hardened. Devices designed to remain stable in enviroments of -40 to +85o C and maintain all technical specifications.
OUTPUT PORTS SURGE - Pass 6kV 200A @ 100khz ring wave surge test. As defined in IEEE C62.41.1991 for cat A3 type device.
INPUT PORT SURGE - Pass 6kV 3kA combination wave @ 100khz ring wave surge test. As defined in IEEE C62.41.1991 for cat B3 type device.
Special magnetism resistant ferrite core material allows ferrites continued operation within designed specifications when high RF levels are applied.
NESC Compliant 4.55mm ground clamp, stainless steel wood mounting screws and UV protected labels.
|
|
|
|
|
|
|
|
